| Rotator
Reactive Steel Target |
patent # 7,114,725 B2 |
| Item |
6-Rotator |
| Use |
Pistol and Shotgun use only |
| Target Material |
3/8" AR-500 Mil Spec Armor Plate |
| Target paddle dimensions |
Two 8" x 8" paddles |
| Target construction |
Bolted assembly |
| Minimum shooting distance |
8 Yards |
| Ammunition guidelines |
No slugs, armor piercing (AP), steel core or hardened
type
bullets. Maximum muzzle velocity 1500 fps.
Shotgun: lead bird or lead buckshot only!
|
| Target Assembly Weight |
60 pounds |
| Mechanical Target Action |
Movement is Initiated by first direct bullet impact and
perpetuated by alternating consecutive bullet impacts. |
| |
Rotator paddles progressively gain a wider arc until a
360°
rotation is achieved. |
| |
Full 360° rotation is dependent upon on caliber, impact
timing and consistency
of consecutive hits. |
| |
Target is gravationally reset to vertical position at rest
|
| Target Stands |
36" tubular steel stand set included |
Axle Length
|
36" OAL x 1" solid steel |
| |
|
| Number of consecutive,
alternating |
.45 ACP: 4 to 6 |
| hits required to achieve 360 °
rotation |
.40 S&W: 5 to 8 |
| |
.357 Magnum: 5 to 8 |
| |
.357 SIG: 5 to 8 |
| |
9mm: 8 to 12 |
| Care |
Minimal; keep rust free as much as possible,
re-paint when needed, clean and lubricate
with graphite powder or oil as needed. |
|
|